The Victor® Electronic Mouse Trap PRO offers fast, efficient and effective mouse control. The trap delivers a high-voltage shock that humanely kills mice in seconds with zero escapes. A set of 4 “AA” batteries (not included) provides enough power to kill 100 mice.
Note: Not recommended for outdoor use
Smart Circuit Technology
Advanced smart-circuit technology built into the Victor® Electronic Mouse Trap PRO senses when a mouse enters the trap. It also senses how many mice it catches, and resets itself up to three times to catch three mice per setting. Once a mouse enters the trap, the patented tunnel design and bevelled columns direct the mouse onto metal plates in the floor. This completes the circuit, delivering a fast, high-voltage shock with a 100% kill rate. With each kill, the indicator light on top flashes green for up to seven days.
Easy to Use
The Electronic Mouse Trap PRO is very easy to use. Simply bait, place, and turn on. When baiting, make sure you don’t get any bait or other material on the metal plates, as this will accidentally trigger the trap. And because it’s electronic, the trap is designed for indoor use only.
Once the trap has been turned on, a green light will blink once to indicate the trap is working properly. You’ll also hear a faint buzzing sound as the trap powers up. After a mouse is caught, simply open the lid and dump the mouse into the trash for a no-see, no-touch experience.
Use Anywhere in the House
The Victor® Electronic Mouse Trap PRO is acceptable for use anywhere indoors and around children and pets when used as directed. Its built-in safety switch automatically shuts off power to the trap whenever the lid of the trap is opened. And there are no poisons, chemicals or easily tripped metal bars.
The Victor Electronic Mouse Trap PRO is Easy to Use. Here’s How:
Remove battery cover.
Insert 4 “AA” batteries.
Replace the battery cover.
Open the lid on the electronic mousetrap. Bait the trap using the bait trough provided. The bait trough is located on the back wall of the trap. Apply a small amount of peanut butter or anything high in protein like chocolate, hazelnut spread, etc. Be sure to use gloves, a cotton bud, toothpick or another tool to bait so your scent is not transferred onto the trap. Close the lid.
Place the trap where you have seen signs of rodent activity or along the wall where rodents primarily travel. The trap should be placed lengthwise against the wall with the entrance hole nearest the wall.
Turn on the trap – a green light will blink once showing the trap is working properly.
A blinking green light will indicate a kill. Dispose of the dead rodent, bait, reset and place for continued rodent control.
Tips for use
Just bait the trap, place it against the wall and activate it.
Safe for use in the home.
Green flashing light indicates when the trap is full and should be emptied.
When full, simply dispose of the mice and reset the trap.
A flashing red light indicates that the batteries need to be changed – typically after killing up to 100 mice.
Bevelled columns hold mouse in place for no escapes
Built-in safety switch and tunnel design protect children and pets
100% kill rate
Blinking green light flashes for seven days to indicate kill
Blinking red light indicates low battery
No-see, no-touch experience
Indoor use only
No chemicals or poisons, can be used around children or pets
Trap is reusable or disposable
Requires 4 “AA” batteries (not included)
For use in:
Residential homes, indoors.
Use along walls at runways where mouse activity takes place.
No chemicals or poisons making it acceptable for use around children and pets when used as directed with supervision. Safety-switch disables trap whenever lid is opened.
100% kill rate. No-see, no-touch experience. Kills 100 mice per set of batteries, 3 mice per setting. Bevelled columns for no escapes. Indicator light lets you know when you have a kill and when your battery is low. Reusable.
Victor (Manufacturer Product Number M250PRO)
Victor® Electronic Mouse Trap PRO - Frequently Asked Questions
Q: Where do I place the trap?
A: Place the trap along the wall where rodents primarily travel or where you have seen signs of rodent activity. For example, if you have a mouse in your house (very small droppings as compared to rat droppings, which are about the size of half a raisin).
Q: How do I bait it? / What should I use to bait it?
A: To bait the Electronic Mouse Trap, first make sure the trap is turned off. Place the bait along the back wall of the trap in the bait trough provided. We’ve carefully researched and recommend baiting with anything high in protein like peanut butter or hazelnut spread. Place a small amount of bait (the size of a pea) against the back wall of the kill chamber. Be sure to use gloves or a tool to bait so your scent is not transferred onto the trap. Please don’t place the bait or any other material directly on the metal plates as this will falsely trip the system.
Q: How do I clean the trap?
A: Through repeat use and baiting, dust and debris can settle on the metal plates inside the trap, so we recommend that you clean your trap between each use. To clean the trap:
Turn the unit to the off position and remove the batteries.
Wipe the metal plates with a damp cloth (water or unscented dish detergent only).
Allow the Electronic Mouse Trap to air dry completely.
Replace the batteries and turn the unit back on.
Q: Is the buzzing/clicking normal?
A: The buzzing and slight clicking sound with the Victor® Electronic Mouse Trap is normal during the start-up of the trap. When you first turn the trap on, the green light will blink momentarily and then you will hear the buzzing or a slight clicking sound indicating that you trap is working properly and starting up.
Q: Is it reusable?
A: The Victor® Electronic Mouse Trap is reusable. These traps are able to kill up to 100 mice per set of batteries.